Alarmboerd foar netwurkzoomkameramodules (konvertearje RS232 nei RS485)
Alarm board is spesjaal ûntwurpen foar Savgood Network Zoom Camera modules. It kin de RS232-ynterface fan 'e kamera konvertearje nei RS485-ynterface.
Ynterface beskriuwing:
| Type | PIN Nûmer | PIN Namme | Beskriuwing |
| J2(Blokkearje kamera-ynterface) | 1 | UART1_TX | Kamera Control Series Port TX |
| 2 | UART1_RX | Kamera Control Series Port RX | |
| 3 | UART2_TX | Kamera Series Port2 TX | |
| 4 | UART2_RX | Kamera Series Port2 RX | |
| 5 | GND | GND | |
| 6 | +12V | DC12V | |
| J6(Blokkearje kamera-ynterface) | 1 | NC | |
| 2 | GND | GND | |
| 3 | AUDIO_IN | Kamera Audio In | |
| 4 | GND | GND | |
| 5 | AUDIO_OUT | Kamera Audio Out | |
| J4(Blokkearje kamera-ynterface) | 1 | ETHRX- | Netwurk RX- |
| 2 | ETHRX+ | Netwurk RX+ | |
| 3 | ETHTX- | Netwurk TX- | |
| 4 | ETHTX+ | Netwurk TX+ |
| Type | PIN Nûmer | PIN Namme | Beskriuwing |
| J3 | 1 | AUDIO_IN | Audio yn |
| 2 | AUDIO_OUT | Audio útfier | |
| 3 | GND | GND | |
| 4 | ALARM_IN | Alarm yn | |
| 5 | ALARM_OUT | Alarm út | |
| 6 | ALARM_OUT_TC | Alarm út TC | |
| 7 | GND | GND | |
| 8 | RS485+ | PT Control, RS485+, Pelco | |
| 9 | RS485- | PT Control, RS485-, Pelco | |
| 10 | GND | GND | |
| 11 | CVBS_OUT | CVBS út | |
| 12 | GND | GND |
| Type | PIN Nûmer | PIN Namme | Beskriuwing |
| J5 | 1 | +12V_IN | DC 12V + Yn |
| 2 | GND | GND | |
| 3 | NC | ||
| 4 | NC | ||
| 5 | ETHTX+ | Netwurk RX- | |
| 6 | ETHTX- | Netwurk RX+ | |
| 7 | ETHRX+ | Netwurk TX- | |
| 8 | ETHRX- | Netwurk TX+ |
| Type | PIN Nûmer | PIN Namme | Beskriuwing |
| J19(Power In) | 1 | +12V_IN | DC 12V + Yn |
| 2 | GND | GND |
| Type | PIN Nûmer | PIN Namme | Beskriuwing |
| J10(PT Control Series Port) | 1 | GND | GND |
| 2 | SD_UART_RX | RS232 RX, Visca Protokol | |
| 3 | SD_UART_TX | RS232 TX, Visca Protokol | |
| 4 | +3.3V | 3.3V út |
